Novel Tellurite Glass (60-x)TeO2–10GeO2 -20ZnO–10BaO - xBi2O3 for Radiation Shielding

In this article, high dense glasses based heavy metal former and modifier have been synthesized. The glass system with composition formula of (60-x)TeO2–10GeO2 -20ZnO–10BaO - xBi2O3 (where x = 2.5, 5, 7.5, and 10 mol. %). The glasses have been produced using the usual melt, quenching, and annealing process. Many physical features were investigated. To confirm the amorphous nature of theses glasses, we examined the samples with X-ray diffraction in the range of between 10° and 80°. Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) transmission spectrum for the current glass samples within the range of 400–1500 cm−1 has been recorded to study the behavior of the obtained glasses that is mixed between tellurium and germanium glass phase. To study the transparency and cut-off wavelength and other optical properties, Ultraviolet–Visible spectrometer (UV–Vis) was utilized between 200 and 800 nm. Radiation shielding ability of the (60-x) TeO2–10GeO2-20ZnO–10BaO-xBi2O3 glasses was examined. Monte Carlo simulation method was applied to estimate the shielding parameters for gamma photons with various energies varied in rang from 0.015 to 15 MeV. © 2020 Elsevier B.V.All Authors present their grateful acknowledge to the Universiti Putra Malaysia (UPM), for supporting this work by chemicals and services, which granted by UPM under IPB-9554200

Impact of Modifier Oxides on Mechanical and Radiation Shielding Properties of B2O3-SrO-TeO2-RO Glasses (Where RO = TiO2, ZnO, BaO, and PbO)

The influence of modifier oxides (TiO2, ZnO, BaO, and PbO) on the mechanical and radiation shielding properties of boro-tellurate glasses is investigated. Samples with a composition of B2O3-SrO-TeO2-RO (RO represents the modifier oxides) were fabricated using the melt quench method, and their physical, mechanical, and radiation attenuation parameters were reported. For this aim, Monte Carlo simulation was employed to predict the radiation attenuation parameters, while the Makishima-Mackenzie model was adopted to determine the mechanical properties. The tightly packed structure with better cross-linkage density is possessed by the Ti-containing glass (SBT-Ti) system among the titled glass batch. The higher Poisson and micro-hardness values of the SBT-Ti glass indicate its structure’s reduced free volume and better compactness. For the glass with PbO, the linear and mass attenuation coefficients are highly increased compared to those glasses doped with TiO2, ZnO, and BaO. The thinner half-value layer was reported at 0.015 MeV, taking values 0.006, 0.005, 0.004, and 0.002 for samples with TiO2, ZnO, BaO, and PbO, respectively. SBT-Pb sample (with PbO) has a thinner HVL compared to other fabricated glass samples. The fabricated glasses’ thickness (Deq) equivalent to 1 cm of lead (Pb) was reported. The results demonstrated that Deq is high at low energy and equals 11.62, 8.81, 7.61, 4.56 cm for SBT-Ti, SBT-Zn, SBT-Ba, and SBT-Pb glass samples, respectively. According to the Deq results, the fabricated glasses have a shielding capacity between 30 and 43% compared to the pure Pb at gamma-ray energy of 1.5 MeV. At high energy (8 MeV), the transmission factor values for a thickness of 1 cm of the fabricated samples reach 88.68, 87.83, 85.95, and 83.11% for glasses SBT-Ti, SBT-Zn, SBT-Ba, and SBT-Pb, respectively. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.The authors acknowledge the support of Taif University Researchers Supporting Project number (TURSP-2020/127), Taif University, Taif, Saudi Arabia

Germanate Oxide Impacts on the Optical and Gamma Radiation Shielding Properties of TeO2-ZnO-Li2O Glass System

In this work, a series of tellurite glass combined with various concentrations of germanium oxide was fabricated according to the formula of (70-x)TeO2-xGeO2–20ZnO-10Li2O where x = 5, 10, 15 and 20 mol% via utilizing the melt-quench method for possible use in a radiation shielding applications. X-ray diffraction and Attenuated Total Reflectance Fourier Transform Infrared was employed to investigate the structure of the synthesized glasses. The density and Poisson's ratio for current samples reduced gradually from 5.221–5.008 g.cm−3 and 0.134–0.131, respectively, while the enhancement in bandgap values from 3.700–3.872 eV with addition of GeO2 is observed. The linear attenuation coefficient values at 0.015 MeV are 230.123 and 236.832 cm−1 for samples TG1 and TG4, respectively. Moreover, the lowest half-value layer attained via TG1 and raises from 0.0030 to 3.6684 cm while the highest HVL attained by TG4 and raises from 0.0029 to 3.9696 cm. © 2020 Elsevier B.V.All Authors present their grateful acknowledge to the Universiti Putra Malaysia (UPM), for supporting this work by chemicals and services, which granted by UPM under IPB-9554200. Also, the authors present their grateful acknowledge to the university of Tabuk, Tabuk, Saudi Arabia for supporting this work by some chemicals

Glow curve analysis of glassy system dosimeter subjected to photon and electron irradiations

The current paper illustrates glow curve analysis of newly developed Borate glass dosimeters. A series of dosimetric properties including dose response for photons and electrons, energy response, optical fading, and precision were determined. Glow curve deconvolution based on the general order kinetics equation was applied to extract the trapping parameters. Excellent fitting was obtained with the superposition of three-second order glow peaks. The quality of fitting was monitored through the r2 value which is always in excess of 0.9998. Thermoluminescence (TL) measurements showed that the material exhibits good linear dose–response over the delivered range of absorbed dose from 0.5 to 4 Gy for photons and electrons irradiation with low energy dependence. The material exhibits large signal loss when exposed to direct sunlight and moderate signal loss when exposed to fluorescent light. Therefore, it is recommended to use the current dosimeters indoor and to avoid prolonged direct exposure to fluorescent light. This combination of properties makes the material suitable for radiation dosimetry

Germanate oxide impacts on the optical and gamma radiation shielding properties of TeO2-ZnO-Li2O glass system

In this work, a series of tellurite glass combined with various concentrations of germanium oxide was fabricated according to the formula of (70-x)TeO2-xGeO2–20ZnO-10Li2O where x = 5, 10, 15 and 20 mol% via utilizing the melt-quench method for possible use in a radiation shielding applications. X-ray diffraction and Attenuated Total Reflectance Fourier Transform Infrared was employed to investigate the structure of the synthesized glasses. The density and Poisson's ratio for current samples reduced gradually from 5.221–5.008 g.cm−3 and 0.134–0.131, respectively, while the enhancement in bandgap values from 3.700–3.872 eV with addition of GeO2 is observed. The linear attenuation coefficient values at 0.015 MeV are 230.123 and 236.832 cm−1 for samples TG1 and TG4, respectively. Moreover, the lowest half-value layer attained via TG1 and raises from 0.0030 to 3.6684 cm while the highest HVL attained by TG4 and raises from 0.0029 to 3.9696 cm

Optical and structural properties of lithium sodium borate glasses doped Dy3+ ions

Absorption and emission spectra of lithium sodium borate glass doped with different concentrations of Dy3+ have been reported. The concentration of Dy3+ was varied from 0.3 to 1.3 mol%. The amorphous nature of the prepared samples was confirmed by the X-ray Diffraction (XRD). Fourier transforms infrared (FTIR) spectra, and other significant physical properties (energy band gap, density, ion concentration, molar volume, Polaron radius and inter-nuclear distance) have been analyzed in the light of the different oxidation states of the co-dopant ions. The absorption spectrum showed nine peaks with hypersensitive transition corresponding to 6F11/2 + 6H9/2 at 1256 nm. As a result of 380 nm excitation wavelength, the luminescence spectra showed two characteristic bands at 479 nm and 587 nm. These absorption bands were attributed to 6P15/2 → 6H15/2 and 6P15/2 → 6H13/2 transitions of trivalent Dy3+ ions. The current study indicates that Dy doped lithium sodium borate glasses are attractive for solid-state laser applications

Investigation of photon, neutron and proton shielding features of H3BO3–ZnO–Na2O–BaO glass system

The current study aims to explore the shielding properties of multi-component borate-based glass series. Seven glass-samples with composition of (80-y)H3BO3–10ZnO–10Na2O–yBaO where (y = 0, 5, 10, 15, 20, 25 and 30 mol.%) were synthesized by melt-quench method. Various shielding features for photons, neutrons, and protons were determined for all prepared samples. XCOM, Phy-X program, and SRIM code were performed to determine and explain several shielding properties such as equivalent atomic number, exposure build-up factor, specific gamma-ray constants, effective removal cross-section (SR), neutron scattering and absorption, Mass Stopping Power (MSP) and projected range. The energy ranges for photons and protons were 0.015–15 MeV and 0.01–10 MeV, respectively. The mass attenuation coefficient (µ/?) was also determined experimentally by utilizing two radioactive sources (166Ho and 137Cs). Consistent results were obtained between experimental and XCOM values in determining µ/? of the new glasses. The addition of BaO to the glass matrix led to enhance the µ/? and specific gamma-ray constants of glasses. Whereas the remarkable reductions in SR, MSP, and projected range values were reported with increasing BaO concentrations. The acquired results nominate the use of these glasses in different radiation shielding purposes

Photoluminescence and thermoluminescence properties of Li2O-Na2O-B2O3 glass

Influence of Nd3+ concentration on the optical and thermoluminescence (TL) properties of melt-annealed synthesized 10 Na2O: 20 Li2O: (70-x) B2O3: xNd2O3, where 0.1≤ x ≤0.7 (LNB) glasses are determined. The absence of sharp peaks in X-ray diffraction patterns confirms the amorphous nature of the prepared glasses. The photoluminescence spectra under 800 nm laser excitations at room temperature exhibit three prominent peaks centred at 538, 603 and 675 nm corresponding to the transitions of 4G7/2 → 4I9/2, [4G7/2 → 4I11/2, 4G5/2 → 4I9/2] and [4G7/2→ 4I13/2, 4G5/2 → 4I11/2], respectively. The TL glow curve exhibits a prominent peak (Tm) at 180°C. The best performance of the prepared glass was found at 0.5 mol% of Nd2O3. We achieved a good linearity of TL response against dose between 0.5 to 4.0 Gy. The calculated value of the effective atomic number, Zeff, is 7.55 which is nearly tissue equivalent (Zeff = 7.42). These promising features demonstrate the capability of the aforementioned glass to be used as a radiation dosimeter

Optical and erbium ion concentration correlation in lithium magnesium borate glass

Tuning the optical response of lithium magnesium borate glass via controlled doping of rare earth ions is the key issue in photonic devices. Glasses with composition 30Li2O-(60-x)B2O3-10MgO-xEr2O3, where 0 ≤ x ≤ 1 are prepared by conventional melt-quenching technique. The X-ray diffraction (XRD) pattern confirms the amorphous nature of all samples. Fourier transform infrared (FTIR) spectra reveal the presence of BO3 and BO4 local structure unit. The physical parameters, such as the direct and indirect optical energy band gap, oscillator strength, refractive index, ion concentration, Polaron radius, molar volume and inter-nuclear distance are calculated and analyzed. The room temperature UV-vis-IR spectra comprised of ten absorption bands centered at 1523, 973, 796, 650, 550, 522, 486, 447, 406, 373 nm corresponding to the transitions from the ground state to 4I13/2, 4I11/2, 4I9/2, 4F9/2, 4S3/2, 2H11/2, 4F7/2, (4F5/2 + 4F3/2), 2G(1)9/2, 4G11/2 excited states, respectively. The peak evidenced at 522 nm is due to hypersensitive transition. The up-conversion spectra exhibits three emission peaks centered at 509, 547 and 656 nm. All the emission bands (green and red) at 0.5 mol% of Er3+ shows a significant enhancement in the intensity attributed to the energy transfer from Mg2+ to the Er3+ ion. Our results suggest that these glasses can be nominated for solid state lasers